Table of Contents
How to Identify the Correct Shower Faucet and Cartridge Type
Identifying the Brand/Manufacturer of Your Shower Faucet
Faucets were standardized, and each had the same internal components but had an entirely different style and design on the exterior. The replacement parts can be bought from various suppliers, which makes it a simple repair. Today, many manufacturers have specific specifications and components.
There is now a variance between stems (cartridges) and valves and splines. This is why you’ll need to learn which type of faucet you have before repairing it. Knowing the model of your faucet will make it simpler to take apart and repair. Start this process by following:
Are you looking for a brand?
Utilizing a faucet cartridge identification (chart).
Shower Faucet Type and Brand Identification
You can tell the faucet’s maker when you look for a marking indicating its source. It could be engraved, printed, or laser-etched. The most popular brands are listed in the below table.
What Kind of Shower Faucet Do I Have?
If you cannot locate any indications in the tap, you must disassemble it. Begin by removing the handle. It is possible to determine the length of the cartridge (stem) distance of your faucet or turn to the number of splines.
How to Take Apart a Shower Faucet
The first step is to turn off the water flow. This is done by finding the valves that cut off the water (there will be two valves, one for hot and another to turn off cold). If you’re working on your shower, you’ll need to find your main valve for water to the building, outside the house, or the building.
If you have to take off the handle to remove the handle, it is possible to do so with an appropriate screwdriver (Allen wrenches are great). The kind of screwdriver you require will depend on the kind of handle you want to remove:
If you’re working with one lever handle, you’ll need to locate an incredibly small set crew inside the handle and then utilize the Allen wrench.
If you’re working with a crystal handle, it will probably have a plastic cover you can remove with the flat-head screwdriver. This will allow you to remove the stem using the help of a Phillips screwdriver.
If you’re working with faucets with two handles, you must remove the plastic cap with the decorative design (pry off the cap using the help of a Phillips screwdriver).
After removing the screws, you can pull the handle and stem out. They typically come out of the handle from the handle. You might twist the stem before you remove it to disconnect it completely.
Moen Disassembly and Installation Instructions
Figure Out Where Your Faucet Is Leaking or Broken
Now is the time to identify the issue. If you’re dealing with an issue of leaks, you’ll likely observe that the rubber O-rings or washers are worn off (often due to aging). Replacing washers made of rubber is inexpensive and easy to fix. You can bring your parts to the hardware store in your area (plumbing shops are great too). They’ll be able to identify the faucet’s type and the failed part. They can also assist with replacing the faucet.
Read More : Can You Wear 14K Gold in the Shower
How to Identify the Cartridge Brand
You could make money by knowing the brand of cartridge. You can do this by measuring the cartridge’s length and the number of Splines. Once you have this information, you can examine them against an existing reference. Check out this Interline brand Cartridge Identification Chart PDF.
How to Use a Faucet (Valve/Stem) Cartridge Identification Chart
Make use of a ruler or caliper and measure the cartridge. You can measure from the base to the end (from the seat to the splines).
Be aware of the length of the cartridge (Lengths vary from 1-12).
Then, determine the broach pattern using Broach charts (see the B-5 page).
Find the length of your stem’s tier (as indicated on the left and right of every page).
Find the broach pattern that matches (alongside the cartridge photos). Check that it’s correct.
Then, make a note of the part numbers you’ll need.
Additional Tips for Repairing Shower Faucets
Be aware of warranties: Keep all paperwork and records of your faucet’s type and model. If it’s covered by warranty, you could get replacement parts for free by contacting the manufacturer.
Find out the source of your brand’s products: Brands like Pfister do not sell parts at local hardware stores. Do look on Amazon, but because many parts are available on this site, shipping times can be up to three days.
Be aware of what parts can be interchanged: Remember that certain rubber seats, O-rings, and springs might not be interchangeable. They might look the same across brands, but they might not be identical. Delta valve seat, for instance, appears identical to Pfister’s designs. However, the dimensions differ, which could result in leaks and other issues.
This article is true and accurate to the extent of the author’s knowledge. The information provided is intended for educational or entertainment only. It is not intended to replace personal advice or counsel from a professional on financial, business, legal, technical, or other issues.